Detection of speech signal in strong ship-radiated noise based on spectrum entropy

Comparing the frequency spectrum distributions calculated from several successive frames, the change of the frequency spectrum of speech frames between successive frames is larger than that of the ship-radiated noise. The aim of this work is to propose a novel speech detection algorithm in strong ship-radiated noise. As inaccurate sentence boundaries are a major cause in automatic speech recognition in strong noise background. Hence, based on that characteristic, a new feature repeating pattern of frequency spectrum trend (RPFST) was calculated based on spectrum entropy. Firstly, the speech is detected roughly with the precision of 1 s by calculating the feature RPFST. Then, the detection precision is up to 20 ms, the length of frames, by method of frame shifting. Finally, benchmarked on a large measured data set, the detection accuracy (92 %) is achieved. The experimental results show the feasibility of the algorithm to all kinds of speech and ship-radiated noise

Detection of speech signal in strong ship-radiated noise based on spectrum entropy

Comparing the frequency spectrum distributions calculated from several successive frames, the change of the frequency spectrum of speech frames between successive frames is larger than that of the ship-radiated noise. The aim of this work is to propose a novel speech detection algorithm in strong ship-radiated noise. As inaccurate sentence boundaries are a major cause in automatic speech recognition in strong noise background. Hence, based on that characteristic, a new feature repeating pattern of frequency spectrum trend (RPFST) was calculated based on spectrum entropy. Firstly, the speech is detected roughly with the precision of 1 s by calculating the feature RPFST. Then, the detection precision is up to 20 ms, the length of frames, by method of frame shifting. Finally, benchmarked on a large measured data set, the detection accuracy (92 %) is achieved. The experimental results show the feasibility of the algorithm to all kinds of speech and ship-radiated noise

Optimization of phenoxazinone synthase production by response surface methodology and its application in Congo red decolourization

Background: Enzymatic decolourization has been recently proposed as a promising and eco-friendly method for treatment of synthetic dye-contaminated wastewaters. However, the processes require large quantities of enzymes, attracting significant attention in developing efficient methods for mass production of multifunctional enzymes. Several methods such as response surface methodology (RSM) and orthogonal experiment have been applied to optimize the parameters in bioprocesses for enzyme production. Results: In the present study, a laccase-like enzyme, phenoxazinone synthase (PHS) originated from Streptomyces antibioticus was recombinantly expressed in Escherichia coli BL21 (DE3). The production of PHS in E. coli BL21 was optimized by response surface methodology based on Box-Behnken design. A full third-order polynomial model was generated by data analysis with Statistica 8.0 in which the optimal conditions for PHS production were calculated to be 1.525 mM CuSO4 and 16.096 hrs induction at temperature of 29.88oC. The highest PHS production under optimal conditions was calculated to be 4098.51 U/l using the established model. Average PHS production obtained from actual production processes carried out under the calculated optimal conditions was 4052.00 U/l, very close to the value predicted by the model. Crude PHS was subsequently tested in Congo red decolourization which exhibited a low decolourization rate of 27% without mediator. Several mediators were found to improve PHS-catalyzed Congo red decolourization, with the highest rate of 73.89% obtained with 2,2\u81f-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) as mediator under optimized conditions of 4000 U/l PHS activity, 10 \u3bcM ABTS, 100 \u3bcM Congo red, and 8 hrs reaction time. Conclusion: Our results indicated that PHS recombinantly produced in E. coli BL21 was a prospective enzyme for decolorizing reactive dye Congo red

Optimized properties of innovative ElectroChromic Device using ITO / Ag / ITO electrodes

The “Dielectric/Metal/Dielectric” (DMD) stacked films being used as transparent and conductive (TC) electrodes, have demonstrated excellent application in the ElectroChromic (EC) process and devices. In this work, multilayers (IAI) made of 50 nm of Indium Tin Oxide (ITO)/5 nm of metallic silver (Ag)/30 nm of ITO that exhibit band-gap, low resistance of 7.4 Ω and the high figure of merit of 9.9 × 10−3 Ω−1 were introduced in a complete five-layer Glass/IAI/NiOx/LiClO4-PC-PMMA/WO3/IAI/Glass ElectroChromic Device (ECD). The single IAI electrode as well as the two actives EC layers Glass/IAI/NiOx and Glass/IAI/WO3 were firstly characterized for their TC and EC properties respectively. Then, the EC properties of the complete five-layer ECD were analyzed. Fast response time (2.02 s for the bleaching and 2.25 s for complete coloration), wide optical modulation in the visible light region (∼55% at 550 nm), long lifetime (more than 6000 s), large capacity and good stability as well as high coloration efficiency (31.7 cm2 C−1) were obtained. The improved EC performance of ECD were related to the good electrical and optical properties of IAI electrode

Direct Measurements of the Branching Fractions for D0→K−e+νeD^0 \to K^-e^+\nu_e and D0→π−e+νeD^0 \to \pi^-e^+\nu_e and Determinations of the Form Factors f+K(0)f_{+}^{K}(0) and f+π(0)f^{\pi}_{+}(0)

The absolute branching fractions for the decays $D^0 \to K^-e ^+\nu_e$ and $D^0 \to \pi^-e^+\nu_e$ are determined using $7584\pm 198 \pm 341$ singly tagged $\bar D^0$ sample from the data collected around 3.773 GeV with the BES-II detector at the BEPC. In the system recoiling against the singly tagged $\bar D^0$ meson, $104.0\pm 10.9$ events for $D^0 \to K^-e ^+\nu_e$ and $9.0 \pm 3.6$ events for $D^0 \to \pi^-e^+\nu_e$ decays are observed. Those yield the absolute branching fractions to be $BF(D^0 \to K^-e^+\nu_e)=(3.82 \pm 0.40\pm 0.27)$ and $BF(D^0 \to \pi^-e^+\nu_e)=(0.33 \pm 0.13\pm 0.03)$. The vector form factors are determined to be $|f^K_+(0)| = 0.78 \pm 0.04 \pm 0.03$ and $|f^{\pi}_+(0)| = 0.73 \pm 0.14 \pm 0.06$. The ratio of the two form factors is measured to be $|f^{\pi}_+(0)/f^K_+(0)|= 0.93 \pm 0.19 \pm 0.07$.Comment: 6 pages, 5 figure

Measurements of J/psi Decays into 2(pi+pi-)eta and 3(pi+pi-)eta

Based on a sample of 5.8X 10^7 J/psi events taken with the BESII detector, the branching fractions of J/psi--> 2(pi+pi-)eta and J/psi-->3(pi+pi-)eta are measured for the first time to be (2.26+-0.08+-0.27)X10^{-3} and (7.24+-0.96+-1.11)X10^{-4}, respectively.Comment: 11 pages, 6 figure

BESII Detector Simulation

A Monte Carlo program based on Geant3 has been developed for BESII detector simulation. The organization of the program is outlined, and the digitization procedure for simulating the response of various sub-detectors is described. Comparisons with data show that the performance of the program is generally satisfactory.Comment: 17 pages, 14 figures, uses elsart.cls, to be submitted to NIM

Measurement of branching fractions for the inclusive Cabibbo-favored ~K*0(892) and Cabibbo-suppressed K*0(892) decays of neutral and charged D mesons

The branching fractions for the inclusive Cabibbo-favored ~K*0 and Cabibbo-suppressed K*0 decays of D mesons are measured based on a data sample of 33 pb-1 collected at and around the center-of-mass energy of 3.773 GeV with the BES-II detector at the BEPC collider. The branching fractions for the decays D+(0) -> ~K*0(892)X and D0 -> K*0(892)X are determined to be BF(D0 -> \~K*0X) = (8.7 +/- 4.0 +/- 1.2)%, BF(D+ -> ~K*0X) = (23.2 +/- 4.5 +/- 3.0)% and BF(D0 -> K*0X) = (2.8 +/- 1.2 +/- 0.4)%. An upper limit on the branching fraction at 90% C.L. for the decay D+ -> K*0(892)X is set to be BF(D+ -> K*0X) < 6.6%

The σ\sigma pole in J/ψ→ωπ+π−J/\psi \to \omega \pi^+ \pi^-

Using a sample of 58 million $J/\psi$ events recorded in the BESII detector, the decay $J/\psi \to \omega \pi^+ \pi^-$ is studied. There are conspicuous $\omega f_2(1270)$ and $b_1(1235)\pi$ signals. At low $\pi \pi$ mass, a large broad peak due to the $\sigma$ is observed, and its pole position is determined to be $(541 \pm 39)$ - $i$ $(252 \pm 42)$ MeV from the mean of six analyses. The errors are dominated by the systematic errors.Comment: 15 pages, 6 figures, submitted to PL